Safety & Materials

What Pet Treat Brands Should Look for in Silicone Drying Sheets

Pet treats are food, so the drying sheet is a food-contact surface. What to check in silicone drying sheets: material reports, perforation, sizes, and MOQ.

Fruits sun-drying on woven bamboo trays at a producer's yard

The Short Version

Treats are food now, and the drying sheet is a food-contact surface: source food-grade silicone with an FDA 21 CFR 177.2600 report, match the perforation to each product family, and confirm the cleaning and documentation routine before you scale.
Get these three decisions wrong after the purchase order and the cost is a delayed launch; get them right at sample stage and the cost is an afternoon.

Pet Treats Are Being Judged by Food Rules

The scale explains the scrutiny. Euromonitor sizes the global pet care market at roughly US$1.98 trillion in 2024, and APPA reports that about 70 percent of US households own a pet. At that size, pet products stop being an aisle of novelty chews and start being judged the way any food category is judged.
Owner behavior pushes the same way. Industry surveys find roughly half of dog owners making homemade pet food, and 92 percent saying they prefer ingredient transparency — the same impulse behind the human-grade, single-ingredient treat trend. What starts in home kitchens tends to be specified into brand production lines within a season or two.
For a brand, that trajectory lands on one unglamorous component: the sheet the treats dry on. If the packaging says human-grade, the retail buyer across the table will ask what touched the product on the way to the bag — and that includes the drying surface. Which is exactly where treat-line sourcing usually goes wrong.

Where Treat-Line Sourcing Goes Wrong

The first failure is documentation. A sheet bought as a generic dehydrator accessory often arrives with no material specification at all, so when a retail partner or co-packer asks for food-contact evidence, the answer is silence — and the shipment waits while the file is rebuilt from scratch. The second failure is mechanical: a liner pattern mismatched to the job stretches every cycle, and a coarse perforation lets small training treats slip through and stick to the tray below.
Both failures cost the same things — re-dried batches, delayed launches, and a specification that cannot survive a buyer review. The fix is to decide three things before requesting quotes: the material standard, the surface type for each product family, and the tray size. None is difficult, all are cheap to settle at sample stage, and all are expensive to discover after a purchase order. So start with the material itself.

Matching the Sheet to the Product

Food-grade silicone is the baseline, and the document that proves it is a test report against FDA 21 CFR 177.2600, the US regulation for silicone intended for repeated food contact. Ask for that report before comparing prices — a factory that produces it in a day is a different class of supplier from one that goes quiet.
Then match surface to product. Sliced meats and jerky strips dry best on the more open patterns (1 × 1 mm and 4 × 4 mm), where air moves up through the holes and across both faces of the product. Ground meats and thick purees suit the finest 0.5 mm pattern, which holds them while they set — and while lipped, raised-edge sheets do exist in the market for exactly this use, treat them as a category to confirm with your supplier rather than assume: ask what is actually available before writing it into a specification. For small items such as training bites, the 0.5 mm pattern is the right choice.
As the factory behind this guide, PuraDry produces multi-purpose mats in 1 × 1 mm, 0.5 mm, and 4 × 4 mm — at 0.7 mm thick, in standard 60 × 80, 70 × 90, and 80 × 90 cm sizes, with the FDA 21 CFR 177.2600 report available on request. MOQ starts at 20 sheets and samples are free, so each product family can be trial-dried on the surface it would actually scale with.
See the 0.5 mm extra-fine sheets for sizes, MOQ and free samples.

Cleaning and Quality Control

Pet-food contact surfaces earn their keep between batches as much as during them. Wash sheets after every run with food-safe detergent, rinse thoroughly, and dry fully before stacking so no moisture is sealed into storage. Keep the sheets assigned to treat production separate from other uses — that segregation prevents cross-contact between product lines, and it is the first thing a food-safety auditor asks about.
Paperwork belongs in the same routine. File the material specification and the FDA report alongside your batch records, and a retail buyer's safety questionnaire takes minutes instead of weeks. A sheet that is clean, undamaged, and documented is a component your QA team never has to defend. The questions below are the ones treat buyers ask us most often.

Frequently Asked Questions

Are pet treats really held to human food-contact standards?

Functionally, yes — the two categories have merged. The logic is simple: pet treats are food, so the drying surface has to meet food-contact standards. With single-ingredient and human-grade treats now standard shelf claims, brands specify the same silicone grade they would for a product made for people, and a report against FDA 21 CFR 177.2600 is the document that demonstrates it.

Which sheet surface fits which treat?

Sliced meats and fruit or vegetable slices suit perforated sheets, where 1 × 1 mm holes keep air moving through the load. Fine 0.5 mm perforations stop small training treats from slipping through. Ground meats and purees suit the finest 0.5 mm pattern, which holds the mix in place; lipped, raised-edge sheets exist in the market for liquid-heavy products, but confirm availability with your supplier before committing them to a specification.

What does a first trial order look like?

Small by design. PuraDry's MOQ is 20 sheets and samples are free: match a standard size — 60 × 80, 70 × 90, or 80 × 90 cm, all 0.7 mm thick — to your trays, request the FDA report with the samples, and run each treat family on the surface you would actually scale with.

What This Means for Buyers

The pet treat market is being judged by food rules, and the drying sheet is part of that judgment: food-grade silicone backed by a reportable FDA standard, a perforation matched to each product family, and cleaning and documentation habits that hold up in a buyer review. Write down your tray sizes and treat types, then request free samples and the FDA 21 CFR 177.2600 report through the contact page — with an MOQ of 20 sheets, proving the specification costs almost nothing.
Packaged dried mango beside fresh mangoes at a tropical producer

Get a Quote

Need liners for your drying line?

Tell us your tray size and daily volume — we quote from the factory floor, samples included.

Free samples

Test material on your own trays before you commit.

MOQ 20 pcs

Trial runs welcome; 1,000 pcs delivered in 3-5 days.

Get a Quote