Buying Guides
Dehydrator Sheet Sizes Explained: A Fit Guide for Excalibur, COSORI, Ninja & Nesco
Size mismatch drives the worst reviews in this category. Measured tray sizes for Excalibur, COSORI, Ninja and Nesco, plus how to order the right cut.

The Short Version
Measure your trays before you order — size mismatch, not material quality, is the biggest source of negative reviews in this category. For one sheet brand, 5 of its 8 negative reviews were about size. This guide collects the measured tray sizes for Excalibur, COSORI, Ninja and Nesco, shows how to measure correctly, and lists the standard and custom sizes PuraDry cuts to order.
Why Size Mismatch Dominates the Reviews
Size problems read like this: a sheet a finger-width too small slides around the tray and lets puree run underneath; a sheet cut too large buckles at the corners and pools liquid in the folds. On round dehydrators there is a second trap — the center hole. A disc can match the tray diameter perfectly and still be unusable because the hole is the wrong size for the fan hub.
The cost of a wrong-size order goes well beyond the sheet price. For an importer it means return shipping, restocking fees and a month lost before a replacement arrives; for a brand it means a stalled product launch. And the root cause is rarely sloppy manufacturing — it is ordering from a listing title instead of from a tape measure.
Measured Tray Sizes for the Big Four Brands
Start with the machines themselves. Excalibur square units — the 5-tray and 9-tray models such as the 2400, 3500 and 3926TB — use trays measuring 15" x 15", and the brand's official inserts are 14" x 14". Order to the 14" x 14" insert footprint if you want the coverage Excalibur designs for, not to the full 15" tray edge.
COSORI rewards a careful read. On the CP267-FD Premium 6-tray unit, the tray wire rack measures about 13" x 12" — not 13.4", which is the width of the whole machine and a common ordering mistake. The CFD-N051-W 5-tray unit is a different shape entirely: its trays are round, so a square sheet will never sit flat no matter how carefully you cut it. Six trays times a wrong-size sheet is six wasted sheets and a full reload.
Nesco's round dehydrators take discs of 13.5" or 15" diameter depending on the model, and the common solution is a 12.5" diameter mat with a 3" center hole. The Ninja Foodi dehydrating rack offers roughly an 8" round surface per layer — small, and unforgiving of an oversized cut. Four brands, four different footprints, which is why the measuring step cannot be skipped.
How to Measure Before You Order
Take your numbers from the tray, not from the product listing. For square trays, measure width, depth and the diagonal — the diagonal is the check that catches a tray slightly out of square. For round trays, measure the tray diameter and then the center hole diameter, because both numbers decide whether a disc sits flat and clears the fan hub. Write everything down next to the machine model; you will need both when you order. On the Ninja Foodi rack, that is the roughly 8" round layer surface; on a Nesco, it is the tray diameter plus the center hole diameter.
One habit separates smooth orders from returns: validating the numbers against a sample before ordering volume. That step costs an email; skipping it is what turns a small cutting error into a bulk-order return.
Standard Sizes, Custom Cuts and Rolls
On the supply side, PuraDry, a silicone drying sheet factory, keeps three standard sizes: 60 x 80 cm, 70 x 90 cm and 80 x 90 cm — about 23.6" x 31.5", 27.6" x 35.4" and 31.5" x 35.4" respectively. Any custom size can be cut to order, which is the normal route for brands standardizing on one machine fleet. Operations that prefer to cut their own can take sheet rolls up to 2 m wide and 100 m long.
Two commercial terms complete the picture. The minimum order is 20 pieces, and free samples are available so you can validate fit on your actual trays before the production run. In a category where size drove 5 of 8 negative reviews for one brand, the sample step is the cheapest insurance you can buy.
Frequently Asked Questions
What size sheet fits an Excalibur dehydrator?
Excalibur 5-tray and 9-tray models such as the 2400, 3500 and 3926TB take trays of 15" x 15", and Excalibur's official inserts are 14" x 14". Matching the 14" x 14" insert footprint gives you the usable area the manufacturer designs its own accessories around. The 2400, 3500 and 3926TB share the same tray size, so one cut serves a mixed Excalibur fleet.
What sizes can I actually order?
Standard sizes 60 x 80 cm, 70 x 90 cm and 80 x 90 cm — any custom size cut to order. PuraDry also supplies rolls up to 2 m wide and 100 m long for buyers who cut their own sheets, with a minimum order of 20 pieces and free samples available to confirm fit before you commit.
How do I avoid a size-mismatch return?
Measure your tray (and the center hole diameter for round units) before ordering. If you are torn between two sizes, request a free sample first — validating the cut on your actual trays costs an email, while a wrong-size bulk order costs you a month of lead time.
What This Means for Buyers
Everything in this guide reduces to one habit: order from measurements, not from model names. Send the PuraDry team your machine models, your tray measurements including diagonals and, for round units, your center hole diameter through the contact page on this site. They will confirm the cut, send a free sample so you can validate fit on your trays, and quote from the 20-piece minimum upward. If your fleet mixes square and round machines, send both sets of measurements.
