
Custom Silicone Dehydrator Sheets
Custom-Size Silicone Dehydrator Sheets — Cut to Your Tray
Custom-cut silicone dehydrator sheets in any size up to 2 m wide, in 1x1, 0.5 or 4x4 mm. MOQ 20 pcs, free samples, 1,000 pcs in 3-5 days.
Specifications
- Standard sizes
- 60 x 80 cm / 70 x 90 cm / 80 x 90 cm
- Custom sizes
- Any dimension, up to 2 m wide; roll form up to 100 m
- Thickness
- 0.7 mm standard
- Perforation
- 1x1 mm, 0.5 mm or 4x4 mm
- Material
- 100% food-grade silicone, BPA-free
- Compliance
- FDA 21 CFR 177.2600 — test report available
- MOQ
- 20 pcs
- Lead time
- 3-5 days for 1,000 pcs
- Samples
- Free
Your Tray, Your Dimensions
Standard sheets cover the common tray sizes; when yours is different, we cut to your exact dimensions — anything up to 2 m wide, supplied as sheets or as a roll up to 100 m long so you can trim on the line. Measure your tray before ordering and we will confirm the dimensions with you before production.
Choose Your Hole Pattern
Every custom order runs in the same 0.7 mm food-grade silicone as our standard sheets, with 1x1 mm standard, 0.5 mm extra-fine or 4x4 mm large perforations. The material is compliant with FDA 21 CFR 177.2600, with the latest test report available on request.
Ordering and Samples
Development starts with a free sample to verify fit on your trays — request one through the contact page. Orders start at 20 pieces, and 1,000-piece orders ship in 3-5 days.
How to Order Custom Cuts
- Send your tray measurements — width, depth and diagonal for square trays; diameter and center hole diameter for round trays.
- Choose your hole pattern — 1x1 mm standard, 0.5 mm extra-fine, or 4x4 mm large — and your quantity.
- Check fit with a free sample first, then we run the production order.
Compatible Sizes & Tray Models
We cut to your tray's inside dimensions. Measure your tray before ordering — for round trays, measure the center hole diameter too. Free samples let you check fit first.
Tray model | Tray size | Our cut |
Excalibur 5-tray / 9-tray (2400, 3500, 3926TB) | 15" x 15" tray; 14" x 14" insert | 14" x 14" |
COSORI CP267-FD | Wire rack about 13" x 12" | 13" x 12" |
COSORI CFD-N051-W | Round trays | Round cut — send the tray diameter |
Nesco round models | 13.5" or 15" discs | 12.5" disc with 3" center hole — confirm your model |
Ninja Foodi | About 8" round per layer | 8" round |
Frequently Asked Questions
What measurements do you need from me?
For square trays, width, depth and the diagonal. For round trays, the tray diameter and the center hole diameter. Both numbers decide whether the cut sits flat and clears the fan hub.
What sizes can you cut?
Any dimension up to 2 m wide, in roll form up to 100 m long. Standard sizes are 60 x 80, 70 x 90 and 80 x 90 cm.
Which perforation should I choose?
1x1 mm is the all-round standard, 0.5 mm extra-fine is for herbs and small pieces, and 4x4 mm is for high-moisture loads.
What is the minimum order and lead time?
Orders start at 20 pieces. Orders of 1,000 pieces ship in 3-5 days. Samples are free.