Silicone Dehydrator Sheets for Dried-Fruit Producers

Dried-fruit lines run on tray fit and airflow. Our sheets are cut to your tray's inside dimensions in 0.7 mm food-grade silicone, in three hole patterns, so slices dry evenly without sticking to the mesh or falling through.

Orders start at 20 pieces, and samples are free — check the fit on your own trays before you commit.

Choose the hole pattern for the fruit

1x1 mm is the all-round standard for sliced fruit: it holds slices flat while warm air moves through the holes from both sides, so batches dry evenly with less flipping.

4x4 mm large holes move the most air for high-moisture loads — mango, tomato and juicy fruit where moisture removal is the bottleneck. Slices must be bigger than the holes.

0.5 mm extra-fine is for small pieces, berries and herbs that would sag into a standard mesh.

See the full comparison in Choosing the Right Dehydrator Liner for Each Food and the hole-pattern range on Perforated Silicone Dehydrator Sheets.

Choosing the Right Dehydrator Liner for Each Food

Fruit leather and purees without the mess

Purees and fruit leather need a liner that holds liquid instead of letting it run through the mesh. Order the 0.5 mm extra-fine pattern and peel the liner away once the surface sets.

For how yield is lost and recovered on commercial lines, read From Puree to Roll-Up: How Silicone Sheets Improve Fruit Leather Yield.

The mat is the same 100% food-grade silicone, BPA-free, rated -40°F to 356°F (-40°C to 180°C), and compliant with FDA 21 CFR 177.2600, with the test report available on request.

Multi-Purpose Silicone Mat

Ordering summary

Material

100% food-grade silicone, BPA-free, 0.7 mm

Temperature

-40°F to 356°F (-40°C to 180°C)

Compliance

FDA 21 CFR 177.2600 — test report on request

Standard sizes

60 x 80 / 70 x 90 / 80 x 90 cm; any dimension cut to order

Hole patterns

1x1 mm standard, 0.5 mm extra-fine, 4x4 mm large

MOQ

20 pcs

Lead time

1,000 pcs in 3-5 days

Samples

Free

Buyer questions

Frequently Asked Questions

Send your tray sizes and quantities through the contact page — we will confirm the cut, send a free sample, and quote from 20 pieces up.